Project Egress - Fuctional Gearbox Patch
Created by Andrew Barth

I'm super excited to release this patch, which is mostly an almost complete reverse-engineering of the manual drive gearbox for the hatch. With this update, you can now pull a lever and operate all of the latches in 4-5 easy pulls!

One thing to note is that, due to the large number of small parts, the manual gearbox is somewhat delicate, but should be sturdy enough to operate the latches. Once the gearbox is at either end of travel, however, it will be easy to shear or over-stress a part and break it. I had a few beta-testers for the gearbox I printed for the Smithsonian and brought to SpaceFest X, including Michael Collins himself!

As with the last batch of parts, there are no built-in tolerances for fits since every printer/manufacturing process is different and requires different adjustments. Keep that in mind while making parts that are intended to fit together. I would also suggest machining the pins, if you have the ability and facilities, as that will provide smoother motion overall. If you don't machine them and want to print them instead, I would recommend smoothing them down with sandpaper.

All hardware labeled with a name like "blah blah - MMC ####" indicates a standardized part, with the McMaster-Carr part number being what's after "MMC". The hardware you buy doesn't have to come from McMaster, but it does need to have the same dimensions (look out for countersink angle in particular!!).

Best of luck, and happy spacecraft building!

Andrew

__________________________________________________________________________

Full changelog (8/15/19):

---Reworked entire gearbox to create realistic drive functionality

---Reworked Hinge Assembly to make them better (there were some interferences I had accidentally overlooked... Whoops!)

---Added a sleeve for the hatch frame/vent plug to keep the plug from rotating

---Changed the following individual parts (updated models and drawings included):
	+Vent Grille - Added a groove for a retaining ring
	+Vent Plug - Added notches to keep the plug from rotating
	+Gearbox Output Bottom Linkage - Distance change 
	+Gearbox Output Side Linkage - Distance and model change
	+Bottom to Right Side Bell Crank - Distance change
	+Right Side to Bottom Bell Crank - Distance change

---Changed some textures (does not affect the shape of the models)

